Racing at Spa | Assetto Corsa | ACFL F1 2019

My aim for this series is to race against AI drivers in the ACFL F1 2019 car pack on the most fierce tracks. I will be posting my previous PB and this videos PB down below along with the top 3 real life drivers' lap times. Also see my rig and setting setup below.

Welcome to Belgium, home of the famous Spa-Francorchamps. One of the greatest lap times in, which I plan to beat, was set by Valtteri Bottas
with an astonishing time of 1:46.286 on August 26th 2018. Nowadays the F1 scene has made changes to it's regulations which can make certain aspects of racing slightly more challenging, as if Spa wasn't challenging enough, and slightly less challenging. Beating one of the professional times does not make me an F1 driver, just good at games 'n stuff.


Track Record:

1: Valtteri Bottas | Mercedes | 1:46.286
2: Sebastian Vettel | Ferrari | 1:46.644
3: Lewis Hamilton | Mercedes | 1:46.721
Previous PB: 1:49.475
New PB: 1:47.841



Rig:

CPU: Intel Core i3-6100 @3.7GH
RAM: Corsair Vengeance LPX 16GB @3200MHz with 16-18-18-36 timing.
GPU: NVIDIA GeForce GTX 1050 Ti
OS: Windows 10 Insider Build 10.0.183662
Wheel: Logitech G29 with aftermarket rim when drifting and stock rim when racing
Pedals: Logitech G920/29 with load cell modification
Shifter: Logitech G920/29 with DIY mods to make the shifting heavier.



AC Content Manager Settings:

Racing:
Time of Day: 08:36
Weather: Clear
Temp: 36 C
Wind: 0km/h
Opponents Strength: 85.0±15.0%
Opponents Aggression: 50.0±50.0%
Penalties: Drive-Through
Auto Shifting: Off
Auto Clutch: Off
Auto Blip: F1 = On, GT3 or lower = Off
Ideal Line: Off
TCS: Factory
ABS: Factory
ESC, ESP, DSC: Off
Fuel Consumption: 1.0x
Mechanical Damage: 100%
Tyre Wear: 1.0x
Slipstream Effect: 1.0x
Tyre Blankets: On

FFB:
Gain: 100%
Filter: 0%
Minimum Force: 2.5%
Kerb Effect: 50%
Road Effect: 50%
Slip Effect: 0%
ABS Effect: 25%
Enhanced Understeer Effect: Off
Soft Lock: On
Skip FFB Steps: 0
Hardware Lock: Off (This causes major issues with my current weel setup, once an OSW is introduced I may play around with this and a LUT)
Centre Boost Gain: 1.5%
Centre Boost Range: 10%
Enable FFB Post-Processing: Off
Unlock Experimental options: Off

Video:
Resolution: 1080p [1920x1080]
V-Sync: Off
Limit Frame-rate: Off
Rendering Mode: Single Screen
MSAA: Off
Anisotropic Filtering: 8x
Word Detail: Very High
Shadows Resolution: 2048x2048
Smoke Generation: Low (This causes massive frame rate drops)
Show Smoke in Mirrors: Off
Reflection Resolution: 1024x1024
Rendering Frequency: 3 faces per frame
Rendering distance: 600m
Post Processing: Enabled
Filter: Default
Overall Quality: Medium
Glare Quality: Medium
Depth of Field: Off
Motion Blur: Off
Saturation: 100%
Heat Shimmering: Off
Sun-rays: On
FXAA: On
Mirror Resolution: 256x1024 [HQ]
Skybox Reflection: 120%
Mip LOD Bias: 0
Max frame latency: 1